CE MARKING FOR CEMENT—CERTIFICATE OF CONFORMITY FOR CEMENT PRODUCTS

CE Marking certification is for products sold in the European Economic Area (EEA), and other regions. The CE mark is a “passport” that allows manufacturers to freely circulate their products within the EEA without having to obtain separate approval in each country.

To obtain CE Marking for Cement, manufacturers must demonstrate that their products meet the essential requirements of the relevant European Directives. If you are looking to sell your cement products in the EEA, then you will need to obtain CE Marking certification.

CE marking certification is a mandatory conformity mark for certain products sold within the European Economic Area (EEA). This marking is based on the assessment system and harmonized standards that include:

1. EN 197-1:2011 for general cements
2. EN 14216:2024 for low heat
3. EN 413-1:2011 for masonry cement, and 
4. EN 197-4:2004 for low early strength blast furnace cements.

The manufacturers’ role is to implement the FPC: Factory Production Control and conduct inspection and programme like statistical study of results, type testing, follow-up or contrast testing, and assessment and acceptance of inspections strategies. 

We have widespread recognition over the areas of CE Marking Cement in UAE – Abu Dhabi, Dubai, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah. Besides, we provide consulting services and certification approval throughout Oman, & Saudi Arabia.

To affix the CE Marking, manufacturers must prepare a Declaration of Conformity in which they state that their product meets all applicable requirements of the relevant directive(s). They must then keep this Declaration of Conformity available for inspection at their premises.

If you are looking to purchase a product that bears the CE mark for cement, you can be confident that it has been assessed for compliance with all relevant European health, safety, and environmental protection legislation.

The CE Marking documents include certificate of constancy of performance by a certification body as the DoP by the manufacturer. As per the latest version that became recognized mandatory in July 20-13. Thereafter, the mark because legal means to place products on UK market. 

Here’s a brief overview of the key points: 

1. Applicable EU Directives: 
2. Notified Bodies 
3. Harmonized Standards: 
4. Conformity Assessment: 
5. Essential Requirements: 
6. CE Marking Affirmation: 
7. Declaration of Conformity: 
8. Market Access:

For a product to bear the CE Marking for Cement, it must be manufactured following an approved Quality Management System and must be independently tested and certified by a notified body. Here, Ascent is the notified body and does the testing in UAE for cement products.

Here are a few requirements for a cement product certificate:

• BIS permit: To utilize a standard imprint (ISI Mark), a maker should get a BIS permit from the relevant standard. The BIS concedes a permit given an evaluation of the manufacturer’s framework, quality control, testing capacities, and making process.
• CE Marking: Cement manufacturers should guarantee that their item products meet the important European fit norms for mechanical resistance and stability.
• Safety in the event of fire: Cement should meet safety necessities in case of fire, including its capacity to oppose fire and forestall the spread of blazes.

Other prerequisites for cement product certification include:

• Subtleties of the unrefined substances being utilized for cement-making
• Identity proof of the maker
• Factory Investigation
• Duplicate of trademark enrollment
• Other endorsed documents and records

Notified bodies are independent organizations that have been accredited by a European Union Member State to carry out certain activities relating to the CE marking of products. 

These activities include assessing manufacturers’ quality management systems, conducting product testing, and issuing CE Marking certificates of compliance.

If you’re wondering “How To Get CE Certification”, a few main directives apply to concrete products being placed on the market in the European Union:

• The Construction Directive Regulation (Repealing the layer construction product directive)
• The Construction Product Declaration Regulation (EU) No 305/2011
• The Energy Efficiency Directive (2012/27/EU)

Grades of cement are likely to be found such as 32.5 N, 42.5 N, 52.5 N, etc.

There are a few things that you need to take into account when looking to get your concrete products certified with a CE mark. 

• First, your organization will need to be registered with the Dubai Authority. Also, your CE Marking for Cement products will need to undergo testing and evaluation by an accredited laboratory to ensure that they meet all the necessary safety and quality standards. 
• Finally, you will need to submit all the relevant documentation to the Dubai Municipality for review and approval. 
• Once you have completed all of these steps, you will then be able to affix the CE mark to your products and begin selling them in the UAE.

Ascent EMIRATES is one of the leading testing, inspection, and certification bodies in the UAE. We offer CE Marking for Cement in UAE, Oman, and Saudi Arabia to help manufacturers ensure that their products conform to the required standards.

1. Have a team of experienced and qualified engineers where we do facilitate necessary notified testing bodies.
2. Testing of the cement notified body lab based in the United Arab Emirates.
3. Offer competitive rates for our certification services.
4. Provide a quick turnaround time for our process and business.
5. Have a strong commitment to quality and customer satisfaction.

Ascent EMIRATES can help you get into CE Marking for Cement Certification in UAE, Oman, & Saudi Arabia, today! So, connect with our expert advisory team @ uaeoffice@ascentworld.com to learn more. Dial : +971-4-4558490 to avail Best Offers.