CE MARKING FOR PED – Pressure Equipment Directive

The European Union’s (EU) second-largest economy, Germany, has recently set new standards for its pressure equipment sector by implementing the EU’s Pressure Equipment Directive (PED). The PED is a set of regulations that govern the safety of pressure equipment in commercial buildings. 

The directive covers all pressure equipment used to process liquids or gases with a maximum working pressure of more than 10 kPa and a maximum operating temperature above 60°C. This includes pumps, piping, valves, and storage tanks. 

Suppliers who sell their products in the country must have them tested to ensure they meet the PEC’s requirements. Ascent EMIRATES with its Consulting bodies has been helping organizations with expert advice on how best to meet the new standards of CE Marking for PED In UAE.

The PED is intended to improve the safety of pressure equipment in the UAE by setting new standards regarding the design, construction, installation, operation, and maintenance of pressure equipment used to process liquids or gases with a maximum working pressure of more than 10 kPa and a maximum operating temperature above 60°C. 

The standards used to set PED requirements are available to all EU member countries, and compliance with PED requirements can be easily demonstrated by using a CE mark on equipment. The CE marking for PED requirement is a key requirement for companies that manufacture, import, or sell pressure equipment in the UAE. 

As the UAE moves forward with implementing the CE Marking For PED, it becomes more important than ever to ensure that your products meet this new standard. By using a CE mark on your products, you can easily demonstrate that your pressure equipment was tested and found to be safe for the handling of flammable liquids, gases, or combustible dust. 

And, if found to be unsafe, it can be corrected or repaired quickly so that it is safe for use. To meet the UAE PED requirements, your pressure equipment must be designed, manufactured, installed, and maintained to ensure it can safely process all loaded conditions. 

This includes the pressure, temperature, and flow rate of liquids, as well as any dust or gases that may be in the liquids. Your products also must have been tested to ensure they can safely handle the maximum operating temperature of 60°C and the maximum working pressure of 10 kPa.

To implement the PED in the UAE, you must first ensure that your products are CE marked. The PED requirements ensure that pressure equipment must be designed and manufactured to ensure it can safely process all loaded conditions. There are four key areas that your equipment must meet to ensure that it is safe for the handling of flammable liquids, gases, or combustible dust: 

1. Design: Ensure the design is safe for the handling of flammable liquids, gases, or combustible dust.
2. Manufacture: Ensure the design is safe for the handling of flammable liquids, gases, or combustible dust.
3. Installation & Maintenance: Ensure the design is safe for the handling of flammable liquids, gases, or combustible dust.
4. Maintain: Ensure the design is safe for the handling of flammable liquids, gases, or combustible dust.

As a pressure equipment manufacturer, you must design your equipment to ensure that it can safely process all loaded conditions. This includes the pressure, temperature, and flow rate of all liquids, as well as any dust or gases that may be in the liquids. You must also ensure that your design is safe for the handling of flammable liquids, gases, or combustible dust. 

Under CE Marking For PED, you must also ensure that your products are manufactured, installed, and maintained to ensure that they can safely process all loaded conditions. This includes the pressure, temperature, and flow rate of all liquids, as well as any dust or gases that may be in the liquids. 

Finally, you must maintain your products to ensure that they are safe for the handling of flammable liquids, gases, or combustible dust. This means periodically inspecting, testing, and maintaining your pressure equipment to ensure it continues to meet all requirements.